Produktai skirti pur polimeras (3)

Syntech Poliurea Primer – Epoxy Metal Syntech Poliurea Primer – Epoxy Metal is a two-component primer based on epoxy resins free from solvents, used to promote adhesion, as a surface sealant for concrete, applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings. Adhesion promoter, surface sealant for concrete, to be applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings. The application must take place on a dry and degreased surface; the substrate must not have crumbly or detached parts and with a degree of humidity that must not exceed 5%. Preparation of the substrate may require some types of mechanical action: Smoothing, bush-hammering, shot peening, hydro-washing. Other mechanical actions that can make the support suitable. The individual components must be mixed carefully until a homogeneous mass is obtained. The material can be applied by roller, brush or spray by means of special airless machines, even in two coats. The temperature of the support must always be at least 3°C higher than the dew point temperature. Minimum application temperature +5°C, maximum temperature +35°C. Approximately 0,20 kg of Syntech Poliurea Primer – Epoxy Metal for every square metre of surface to be treated. Can 10 kg [A] - Can 5 kg [B] - Kit: 1 Can 10 kg [A] + 1 Can 5 kg [B]

Idropittura minerale antialga a base di silicati di potassio stabilizzato ed idrofobizzato, per la decorazione e protezione interna ed esterna di superfici sia nuove che vecchie, come intonaci base calce e cemento, intonaci base calce, intonaci deumidificanti, intonaci idrorepellenti, finiture minerali, intonaci a cappotto premiscelati, calcestruzzo. Elevatissima copertura, sicura inalterabilità agli agenti atmosferici ed ai raggi ultravioletti. Possiede caratteristiche di alta traspirabilità (infatti compatibile con sistema deumidificante) e allo stesso tempo caratteristiche di idrorepellenza. COLORE: Bianco e colori cartella CONFEZIONE: Fusto 4 - 14 lt UTILIZZO: Interno/Esterno DILUIZIONE: Pronto all'uso RESA: 7/8 mq/lt per mano COEFF. DI ASSORB. D'ACQUA CAPILLARE “W24”: < 0,10 kg/(mq*24 h½) RESISTENZA ALLA DIFFUSIONE DEL VAPORE m EQUIVALENTI “Sd”: = 0,08 m TEORIA DI KUENZLE “W*Sd”: < 0,01 kg/(mq*24 h½) CONFORME ALLA DIN 18363

Anti-algae mineral paint based on stabilised potassium silicates for the interior and exterior decoration and protection of both new and old surfaces, such as lime and cement plasters, lime base plasters, dehumidifiers plasters, Water-repellent plasters, mineral finishes, pre-mixed coat plasters, concrete. Very high coverage, safe non-reactivity to atmospheric agents and ultraviolet rays. It has characteristics of high breathability (in fact compatible with dehumidifying systems) and at the same time characteristics of water repellency.